TANNOY vnet 15BP

130dB aktiv 15" sub bas med Vnet, DSP, ljudprocessor, samt extra hög ljudkvalitet. Flygfästen så den även kan hängas i line array. Vnet se pdf.

Se pdf http://www2.standardaudio.se/pdf/DATABLAD/TAN/VNET_Manual.pdf

TANNOY vnet 15BP

The active, DSP controlled and networkable VNET15 BP is a compact, versatile and extremely efficient bandpass subwoofer system, designed to extend the low frequency response of Tannoy VNET™ Series loudspeakers and increase system headroom and providing output levels normally associated with considerably larger enclosures.

The Tannoy VNET15 BP consists of one high efficiency 380mm (15.00") with a 76mm (3.00") voice coil drive unit mounted in a compact and sturdy, black or white painted cabinet constructed from 15mm (5/8") multi-ply birch hardwood; robust enough to survive the punishment that speakers systems are subjected to on the road and in club installations.

VNET™ supports free network topology so cabinets can be arranged in a daisy chain, linked in a star configuration or in any combination of both. Implementation of the network could not be simpler, with connections between nodes via high quality rugged Neutrik Ethercon connectors, which are compatible with standard RJ45 plugs, and CAT5 cable. Each VNET™ module contains a unique address so that no user input will be required to configure network nodes.

VNET15BP

PERFORMANCE

System Type Subwoofer – Band Pass
Frequency Response +/- 3dB (1) 35Hz – 150Hz
Maximum SPL (2) 127dB Program, 130dB Peak
Crossover (DSP Generated) Variable LPF

DRIVE UNIT

Driver Compliment 1 x 380mm (15") Bass Unit

DSP SECTION

Comms Facilities All parameters editable, Firmware updatable
Communications Serial – RS485 Proprietary message format
Dynamic Range 112dB(A) typical
DSP 3rd generation SHARC
Sampling Frequency 96kHz 24 bit A/S-D/A word length
Format 1 IN – 2 OUT

PSU SPECIFICATIONS

Input Connector Locking Neutrik Powercon
Voltage Selection Automatic 45 – 65Hz
Switching Frequency 192kHz Syncronised to DSP
Input Voltage 115/230V +10/-20%

CONSTRUCTION

Enclosure 100 litre vented 15mm (5/8") multiple-ply birch plywood
Connectors 1 x female XLR (input), 1 x RJ45 (network in), 1 male XLR (link), 1 x RJ45 (network link), 1 x Neutrik Powercon
Fittings 2 x recessed carrying handle, Blanking plate for optional VTH pole mount, 8 x M10 inserts for flying, 4 x rubber feet
Dimensions 665 x 440 x 440mm
Weight 31kg
Finish Textured Black or White paint

NOTES: (1) Average over stated bandwidth. Measured at 1 metre on axis. (2) Unweighted pink noise input, measured at 1 metre in an anechoic chamber.