ALTOterminator+CHO171.840

• Individual or mixed outputs
• Twin front-mounting antennas
• Supplied with 4 colour coded transmitters
• 19" rack-mountable 1U

Power supply: 12-18Vdc 800mA adaptor supplied
Batteries: 8 x AA included
Carrier frequencies: Red 863.01 ,Yellow 863.42, Green 864.30, Blue 864.99MHz
Stability: 10PPM
S/N ratio: better than 105dB
THD: less than 0.5% @ 1kHz
Image rejection: 85dB typical
Range: 60m max
Output impedance: 2.2k Ohms
Output level: Balanced: 0-400mv, unbalanced: 0-200mv
Connectors DC in, 4 x XLRM, 6.3mm jack
Dimensions - receiver: 483 x 44 x 225mm
Weight - receiver: 3.8kg

Dimensions - handheld transmitter:     243 x 48mmØ

Weight - handheld transmitter:     238g (no battery)


Rundgångseliminator

24 Bit Automatic Feedback Killer Never happened in the middle of your best performance to get into trouble for annoying feedback problems? Yes or no!? From now on, you can forget about this possibility and situation! �ALTO TERMINATOR II, the ultimate digital anti-feedback processor will make your performance and lift easier. Easy and intuitive interface, compact and discrete size, advanced and accurate filters give TERMINATOR II the real and only identity of Feedback Killer! Finally a digital feedback terminator that works, is acoustically invisible and it is also easy to operate. TERMINATOR II includes 24 filters × channel (two channels). The pitch of each filter varies from 1/70 to 1/84 of an octave. They are so sharp and so accurate that only the feedback content is taken away, while the acoustic content is not modified at all. The user interface is the most intuitive including only an on/off switch and a music/speech selector for each channel. 24 filters per channel Leds for the input signal monitoring Each unit can position up to 2 microphones Rotated POT for switching VOICE mode to MUSIC mode Sharp filters without interfering with the audio signal Fast speed to individuate feedback Dimensions (W×D×H): 483 × 195 × 44mm (19" × 7.7" × 1.7") Weight: 3.1kg (6.8 lb)