Two 10" speakers with cables included Built-in mixer with seven-band graphic EQ and XLR, line and RCA inputs 

Integrated Alesis DSP with 24-bit effects including reverb, delay and chorus 

MIXPACK Express comes complete with two 10" speakers and 350 watts of continuous power. All the right connections are present including balanced XLR, balanced/unbalanced TRS and unbalanced RCA so no matter what you need to connect, you´re all set. MIXPACK Express also includes two speaker cables in the package so you can get set up in no time. The speakers attach and detach to the amp/mixer module using firm, rugged latches and the entire kit can be carried in one hand thanks to a convenient, molded handle on top. The built-in mixer on MIXPACK Express has five input channels with 16 Alesis DSP presets with 24-bit effects for Hall, Room, Vocal, Plate, Stereo Delay, Reverb + Delay and Reverb + Chorus combinations. Fine tune the performance with the integrated 7-band graphic EQ and monitor all of it with the built-in LED and Monitor Out jack. If you need a solid PA system that is loaded with features and easy to transport, grab a MIXPACK Express. If you need a little more power, check out the MIXPACK and MIXPACK Pro, also from Alto Professional. TECH INFORMATION Mixer Section Microphone/Line Input: Electronically balanced, discrele input configuration Frequency Response: 10 Hz to 55 kHz, +/-3 dBu Microphone Input Impedance: 3.9 kΩ Line Input Impedance: 10kΩ Microphone Input S/N ratio: 94 dBu Microphone Inputs: Balanced XLR connectors Line Inputs: Balanced / Unbalanced, 1/4´ (6.3 mm) TRS jack connectors Tape Inputs: Unbalanced RCA jack Inputs Distortion (THD & N): 0.04% at 0 dBu, 1 kHz Channel EQ High shelving: +/-15 dB @ 12 kHz Low shelving +/-15 dB @ 80 Hz Aux Send: 1 with paths for DSP internal section, external DSP section and Monitor Out DSP Section: 24-bit Hall, Room, Vocal, Plate, Stereo Delay, Reverb + Delay and Reverb + Chorus combinations Master Section: Master Level knob, 4 LEDs level meter, 7-band graphic output EQ, and DSP Return level Output Master EQ: 7-band, +/-5 dB @ 63Hz, 160 Hz, 400 Hz, 1 kHz, 2.5 kHz, 6.3 kHz, 16 kHz Monitor Section: Master Level knob, 4 LEDs level meter, and 1/4" (6.3 mm) Monitor Out jack Speaker Section System Type 2-way coax vented box Frequency Response 65 Hz - 20 kHz   Spherical horn Coverage 70° H × 70° V  Protection Electronic circuit on driver  10" (254 mm) Low Frequency Driver / 2" (50.8 mm) Voice Coil, 1" (25.4 mm) Neodymium High Input Connectors 1/4" (6.3 mm) mono (TS) jack on each cabinet Amplifier Section Output Power 350 Watts (EIAJ) Impedance 4Ω Protections Overload / Short Circuit / Soft Clip Limiter / Thermal Protection Fan Cooling Standard Package Two speaker cables Power cord One microphone cable Stands: F-8 or F-3 not included