Öppet 10 -18, lör- & söndag 11-16, Frejg. 27 Sthlm 08 6400 880 och 0735411123. Avhämtning Krylbo & Dörarp & Mjölby.


Kundvagn
Kundvagnen är tom!


©2016 billebro

Powered by FozzCom  9.98

Sitekarta Cookies Köpvillkor

Antal 
Ord. pris:
27 660:-
19 999:-
 SEK
15 999:- exkl. moms
Delbetala från 683:-/månad eller ett år räntefritt

FRI FRAKT TILL HELA

SKANDINAVIEN

Translate  English  Norska  Finska  Danska  Spanska
Produktinformation
Artikel nr : PACK10565
Kortnamn : iLINK RBP+iLINK GBC+iLINK RGY+iLINK GREEN +XY LASER
Märke : iLINK RBP+iLINK GBC+iLINK RGY+iLINK GREEN +XY LASE
Vikt : 13.10 kg
Volym : 1.00 m3
 Läs mer på tillverkarens hemsida


Prod review Prod review Prod review Prod review Prod review
 
Röd, blå, rosa DMX-laser med fjärrkontroll. Superhög Engelsk kvalitet. KAM iLink RBP. 10-kanals DMX. 180mW. KAM:s lasers håller en högre klass än alla andra lasers, bl.a för att lasrarna är intrimmade på exakt rätt frekvenser och syns dubbelt starkare. Se videos. Läs pdf, den kan 100 X mer...

Grön och röd DMX-laser med fjärrkontroll. Superhög Engelsk kvalitet. KAM iLink RBP. 10-kanals DMX. 140mW. KAM:s lasers håller en högre klass än alla andra lasers, bl.a för att lasrarna är intrimmade på exakt rätt frekvenser och syns dubbelt starkare. Se videos. Läs pdf, den kan 100 X mer...

Grön, Blå och Cyan DMX-laser med fjärrkontroll. Superhög Engelsk kvalitet. KAM iLink RBP. 10-kanals DMX. 120mW. KAM:s lasers håller en högre klass än alla andra lasers, bl.a för att lasrarna är intrimmade på exakt rätt frekvenser och syns dubbelt starkare. Se videos. Läs pdf, den kan 100 X mer...

Stunning 40mW bright green laser 

XY-laser, det absolut senaste och häftigaste inom laserteknik, se video! 3-färgs spegelscanner-laser med trådlös fjärrkontroll.  Röd, grön, gul. Använder sig av motordriven höghastighets spegel för att skapa extrema effekter. Mjukvara medföljer inuti som kan styra flera enheter med helt fantastiska shower, utan timmar av programmering (den är redan gjord!). Master/Slav funktion. 10-kanals DMX-styrning, inbyggd mikrofon, musikstyrning. ULTRAHÖG SÄKERHET stänger av lasrarna automatiskt vid fel och lås med nyckel. LED display. Täcker ett helt dansgolv. KAM hög Engelsk kvalitet sedan 60 år. SE VIDEO- HELT OTROLIG.  OBS: Super super kvalitet med OSRAM lasers - inte cheap china crap!!!

Blue DMX laser with remote control
Styckpris: 3.450,00:-
Styckpris: 1.195,00:-
iLink RBP laser
2 lasers, 100mW röd och 80mW blå mixas även till rosa
Zoom 
48 program
LED-display
Mikrofon
Musikstyrning
Fjärrkontrollen styr på/av, musikstyrning, känslighet, autoprogram, färgval, mönster, program 
Plug´n´play
Flera kan länkas master-slav
Nyckel-lås
Fläktkyld
12W
Monteringsbygel
Metallchassi 
16x16x8cm
1.5kg
Läs pdf:en - den kan 100 x mer än detta! 
 
 
Breathtaking new laser from the Kam iLink series Red, Blue and Pink laser with full remote control 100mW Red + 80mW Blue colour mixed to equal Pink Plug & Play operation & built-in patterns Linkable as a kit in Master/Slave mode Auto, Sound-to-Light & DMX512 modes 10 channel DMX512 operation LED function display 3 pin XLR DMX connection Fan cooled operation Key operated safety control Safety mounting point Adjustable hanging bracket Tough metal chassis Beam diameter: <5mm at aperture Pulse data: all pulses < 4Hz (>0.25sec) Divergence (each beam): <2 mrad Divergence (total light): <90 degrees Laser classification: EN60825-1 2007 Laser safety standard: Class 3B Working temperature: 10~40?C Mains Input: AC100-240V, 50/60Hz Fuse: 250V 1A slow blow (20mm glass) Total power: 12W Dimensions (WxHxD): 160 x 160 x 80mm Weight: 1.5 Kg

iLink RGY with remote
2 lasers, 100mW röd och 40mW grön mixas
Zoom 
48 program
LED-display
Mikrofon
Musikstyrning
Fjärrkontrollen styr på/av, musikstyrning, känslighet, autoprogram, färgval, mönster, program 
Plug´n´play
Flera kan länkas master-slav
Nyckel-lås
Fläktkyld
12W
Monteringsbygel
Metallchassi 
16x16x8cm
1.5kg
Läs pdf:en - den kan 100 x mer än detta! 

Breathtaking new laser from the Kam iLink series Red, Green and Yellow laser with full remote control 100mW Red + 40mW Green colour mixed to equal Yellow Plug & Play operation & built-in patterns Linkable as a kit in Master/Slave mode Auto, Sound-to-Light & DMX512 modes 10 channel DMX512 operation LED function display 3 pin XLR DMX connection Fan cooled operation Key operated safety control Safety mounting point Adjustable hanging bracket Tough metal chassis Beam diameter: <5mm at aperture Pulse data: all pulses < 4Hz (>0.25sec) Divergence (each beam): <2 mrad Divergence (total light): <90 degrees Laser classification: EN60825-1 2007 Laser safety standard: Class 3B Working temperature: 10~40?C Mains Input: AC100-240V, 50/60Hz Fuse: 250V 1A slow blow (20mm glass) Total power: 12W Dimensions (WxHxD): 160 x 160 x 80mm Weight: 1.5 Kg

 iLink GBC laser med fjärrkontroll
2 lasers, 40mW grön och 80mW blå mixas även till cyan
Zoom 
48 program
LED-display
Mikrofon
Musikstyrning
Fjärrkontrollen styr på/av, musikstyrning, känslighet, autoprogram, färgval, mönster, program
Plug´n´play
Flera kan länkas master-slav
Nyckel-lås
Fläktkyld
12W
Monteringsbygel
Metallchassi
16x16x8cm
1.5kg
Läs pdf:en - den kan 100 x mer än detta! 

Breathtaking new laser from the Kam iLink series Green, Blue and Cyan laser with full remote control 40mW Green + 80mW Blue colour mixed to equal Cyan Plug & Play operation & built-in patterns Linkable as a kit in Master/Slave mode Auto, Sound-to-Light & DMX512 modes 10 channel DMX512 operation LED function display 3 pin XLR DMX connection Fan cooled operation Key operated safety control Safety mounting point Adjustable hanging bracket Tough metal chassis Beam diameter: <5mm at aperture Pulse data: all pulses < 4Hz (>0.25sec) Divergence (each beam): <2 mrad Divergence (total light): <90 degrees Laser classification: EN60825-1 2007 Laser safety standard: Class 3B Working temperature: 10~40?C Mains Input: AC100-240V, 50/60Hz Fuse: 250V 1A slow blow (20mm glass) Total power: 12W Dimensions (WxHxD): 160 x 160 x 80mm Weight: 1.5 Kg

iLINK GREEN
Information:
Stunning 40mW bright green laser with remote control
Plug & Play operation
Links easily to other iLink models
Auto, Sound-to-Light & DMX512 modes
Sound-to-Light via built-in microphone
8 channel DMX512 operation
Full remote control
LED function display
3 pin XLR DMX connection
Fan cooled operation
Key operated safety control
Safety mounting point
Adjustable hanging bracket
Tough metal chassis
Mains Input: AC100-240V, 50/60Hz
Fuse: 250V 1A slow blow (20mm glass) 
Beam diameter: <5mm at aperture
Pulse data: all pulses < 4Hz (>0.25sec) 
Divergence (each beam): <5 mrad
Divergence (total light): <160 degrees
Laser classification: EN60825-1 2007
Laser safety standard: Class 3B
Working temperature: 10~40°C
Dimensions (WxHxD):145 x 80 x 165mm
Weight: 1.5 Kg

Kam XY Laser RGY
The XY Laser from Kam is an innovative new laser that incorporates unique technology to recreate lighting effects that you would normally expect from a traditional LED scanner. 

A classic LED scanner uses a mirror to reproduce an image of a gobo, this is then panned and tilted through 90° and 120° projecting shapes on to floors, ceilings and walls. The Kam XY Laser is the first laser to cross the boundary into traditional lighting, whilst safely providing laser image scanning across a wide area. The Kam XY Laser reproduces this effect in a compact, easy-to-use and affordable laser unit.

The unique programming and scanning design of Kam XY Laser ensures that this product will not produce a "hotspot" single point laser image. The onboard MSP (Motor Stop Protection) safety cut-out continuously monitors the mirror drivers and is programmed to never allow a persistent laser spot. The MSP device will shut down the laser beam output should any part of the system fail. This circuit, unique to Kam, will change the way laser technology can be used and make future laser shows far more dynamic. 

Each Kam XY Laser has built-in software that will control other XY Lasers. Set the first laser as a Master and all others as Slaves and they’ll follow and snake around the venue in sync. The result is an impressive multi-colour, 32 patterned laser light show that will reach every part of the venue.


SPECIFICATIONS
Linkable pan and tilt scanning RGY laser with remote control
Fill the room with this multi-colour dancing laser
Laser power: 60mW red, 30mW green (Class 3B)
Laser wavelength: 532nm green, 650nm red
Laser source: green - DPSS, red - diode
Scanning system: 3K stepper motor
Scanning angle: Pan >120 degrees, Tilt >90 degrees
Full DMX512 operation
10 DMX channels
Auto mode / 32 built-in patterns
Sound-to-Light via built-in microphone
Variable mic sensitivity
Master/Slave mode
MSP circuitry (Motor Stop Protection)
LED display
Full wireless remote control
Fan cooled operation
Tough aluminium chassis
Adjustable hanging bracket
Safety chain loop
On/Off switch
Safety key switch
Mains fused IEC in and out
Fuse rating: 20mm, 1A slow blow
Rated voltage: AC100V-240V/50Hz-60Hz
Power consumption: 12w
Dimensions (WxHxD): 180 x 80 x 195mm
Weight: 2Kg

Kam XY Laser RBP
The XY Laser from Kam is an innovative new laser that incorporates unique technology to recreate lighting effects that you would normally expect from a traditional LED scanner. 

A classic LED scanner uses a mirror to reproduce an image of a gobo, this is then panned and tilted through 90° and 120° projecting shapes on to floors, ceilings and walls. The Kam XY Laser is the first laser to cross the boundary into traditional lighting, whilst safely providing laser image scanning across a wide area. The Kam XY Laser reproduces this effect in a compact, easy-to-use and affordable laser unit.

The unique programming and scanning design of Kam XY Laser ensures that this product will not produce a "hotspot" single point laser image. The onboard MSP (Motor Stop Protection) safety cut-out continuously monitors the mirror drivers and is programmed to never allow a persistent laser spot. The MSP device will shut down the laser beam output should any part of the system fail. This circuit, unique to Kam, will change the way laser technology can be used and make future laser shows far more dynamic. 

Each Kam XY Laser has built-in software that will control other XY Lasers. Set the first laser as a Master and all others as Slaves and they’ll follow and snake around the venue in sync. The result is an impressive multi-colour, 32 patterned laser light show that will reach every part of the venue.


SPECIFICATIONS
Linkable pan and tilt scanning RGY laser with remote control
Fill the room with this multi-colour dancing laser
Laser power: 40mW red, 40mW blue
Laser wavelength: 650nm red, 450nm blue
Laser source: red - diode, blue - diode
Scanning system: 3K stepper motor
Scanning angle: Pan >120 degrees, Tilt >90 degrees
Full DMX512 operation
10 DMX channels
Auto mode / 32 built-in patterns
Sound-to-Light via built-in microphone
Variable mic sensitivity
Master/Slave mode
MSP circuitry (Motor Stop Protection)
LED display
Full wireless remote control
Fan cooled operation
Tough aluminium chassis
Adjustable hanging bracket
Safety chain loop
On/Off switch
Safety key switch
Mains fused IEC in and out
Fuse rating: 20mm, 1A slow blow
Rated voltage: AC100V-240V/50Hz-60Hz
Power consumption: 12w
Dimensions (WxHxD): 180 x 80 x 195mm
Weight: 2Kg


KAM XY Laser GBC 
Full trådlös kontroll
MSP Motor Stop Protection
Bredstrålande vidvinkel 120 x 90 grader
32 otroliga shower - se videon
Extra starka Osram lasers - presterar dubbelt mot nonames - både i styrka och livslängd


Kam XY Laser GBC
The XY Laser from Kam is an innovative new laser that incorporates unique technology to recreate lighting effects that you would normally expect from a traditional LED scanner. 

A classic LED scanner uses a mirror to reproduce an image of a gobo, this is then panned and tilted through 90° and 120° projecting shapes on to floors, ceilings and walls. The Kam XY Laser is the first laser to cross the boundary into traditional lighting, whilst safely providing laser image scanning across a wide area. The Kam XY Laser reproduces this effect in a compact, easy-to-use and affordable laser unit.

The unique programming and scanning design of Kam XY Laser ensures that this product will not produce a "hotspot" single point laser image. The onboard MSP (Motor Stop Protection) safety cut-out continuously monitors the mirror drivers and is programmed to never allow a persistent laser spot. The MSP device will shut down the laser beam output should any part of the system fail. This circuit, unique to Kam, will change the way laser technology can be used and make future laser shows far more dynamic. 

Each Kam XY Laser has built-in software that will control other XY Lasers. Set the first laser as a Master and all others as Slaves and they’ll follow and snake around the venue in sync. The result is an impressive multi-colour, 32 patterned laser light show that will reach every part of the venue.


SPECIFICATIONS
Linkable pan and tilt scanning RGY laser with remote control
Fill the room with this multi-colour dancing laser
Laser power: 30mW green, 60mW blue
Laser wavelength: 532nm green, 450nm blue
Laser source: green - DPSS, blue - diode
Scanning system: 3K stepper motor
Scanning angle: Pan >120 degrees, Tilt >90 degrees
Full DMX512 operation
10 DMX channels
Auto mode / 32 built-in patterns
Sound-to-Light via built-in microphone
Variable mic sensitivity
Master/Slave mode
MSP circuitry (Motor Stop Protection)
LED display
Full wireless remote control
Fan cooled operation
Tough aluminium chassis
Adjustable hanging bracket
Safety chain loop
On/Off switch
Safety key switch
Mains fused IEC in and out
Fuse rating: 20mm, 1A slow blow
Rated voltage: AC100V-240V/50Hz-60Hz
Power consumption: 12w
Dimensions (WxHxD): 180 x 80 x 195mm
Weight: 2Kg

iLink Blue 500
Blue DMX laser with remote control Part of the Kam iLink laser series 490mW blue laser 15Kpps stepping motor Full remote control Full DMX512 operation 8 DMX channels Auto mode Sound-to-Light via built-in mic Master/Slave modes LED display Tough metal chassis Adjustable metal hanging bracket Safety chain loop Safety key On/Off lock Mains fused IEC Dimensions: 145 x 80 x 165mm (WxHxD) Weight: 1.5Kg To connect multiple iLink lasers you need to make sure that all your units are running software version 4 or above. When turning on the laser, if the LED display on the rear of the unit shows U30, please contact the Lamba service department. service@lambaplc.com 01582 690600 (option 2)
KAM. Engelskt fint märke, 60 år. Används av stora engelska nattklubbar, SVT, film-, TV- och eventföretag.
TEL 08 6400 880 och 0735 411123

34 år, 50.000 kunder: Polisen, Operan, Skatteverket, Vägverket, SL, SJ, SAS, Försvarsmakten, KFM, Cafe Opera, Clas Ohlson, Martin Ohlson, SEB, Clarion hotels, nattklubbar, Pride, gymkedjor, skolor. Statoil köpt 40 ljudanläggningar nu namnbyte Circle K.

En månad pengar åter garanti postorder
Order iväg inom 1 dygn

1000kvm Frejg. 27 Sthm, öppet 10-18 vardag, lör/söndag 11-16

Krylbo & Ljungby & Mjölby avhämtning efter ÖK, ring eller messa 0735411123, 0737518344

Installerar allt överallt
Boka gärna tid vid större inköp
Prenumerera nyhetsmejl

Svensk MVA trekkes automatisk. Norsk MVA vil fakturere av rederiet. Samme beløpet som det er den samme MVA.

All information som skickas till oss krypteras och behandlas säkert via Samport.  
All information som skickas till oss krypteras och behandlas säkert via Samport.  
Billebro lagrar inga uppgifter om ditt bankkort.



 

Specialerbjudanden:



Allt inom ljud & ljus & DJ – Hyra eller köpa ljud eller DJ-utrustning?

Bygg upp en speciell atmosfär till eventet, festen eller ditt framträdande. Välj ljud- och ljussystem med omsorg! Hos Billebro hittar du allt som behövs inom ljud och ljus. Hyr eller köp din PA eller DJ-utrustning, komplettera eventet med nya PA-högtalare till förmånliga priser. Vi som arbetar här är själva DJ:s, musiker, ljudtekniker och studiotekniker, vi vet vad vi snackar om och vi kan ge dig goda råd och bra support även efter köpet.

Testa din nya utrustning!

Ta med din utrustning till butiken och testa den tillsammans med våra produkter. Vårt breda sortiment samt vår kunskap inom ljud och ljus hjälper dig att bygga upp den perfekta lösningen! Och du, vi hjälper även till med installationen!

Upp till 2 års delbetalning för max 50 000 kr via Klarna, ett år räntefritt!